CUSTOM PET PRODUCT PARTNER · MOQ BY PRODUCT, FROM 100 PCS · OEM / ODM / PRIVATE LABEL · FOB WORLDWIDE
Home › Process Guide
BUYER GUIDE

Embroidery vs laser vs sublimation: choosing a customization process

Four processes cover almost every private-label pet product, and each one fails in a different way. Choosing the wrong one shows up as faded artwork after three washes or an unreadable engraving on a dark tag. This guide compares them on durability, colour, cost driver and the substrate each one needs.

Which process lasts longest on a collar?

Embroidery. The thread is stitched through the webbing, so there is no surface layer to peel or rub off. Printed marks on webbing wear at the edges first, especially on a collar that takes load.

Can you print full-colour photos on fabric?

Yes — dye-sublimation handles photographic, edge-to-edge artwork on polyester fabric. It does not work on natural cotton or on metal; for those we use embroidery or laser engraving respectively.

Is laser engraving really permanent?

On metal, yes. The laser removes material rather than adding ink, so there is no layer to wear off. What you should check on a sample is contrast: a shallow engraving on a dark anodised tag can be hard to read.

What is the cheapest way to brand a product?

A woven or printed label applied to an existing blank. It carries your brand without changing the material, which keeps you at the lowest MOQ tier.

The processes at a glance

ProcessWorks onDurabilityColourCost driver
EmbroideryWebbing, fabric, bandanas, plush Highest — thread is stitched through the material Pantone thread, solid coloursStitch count and digitising
Laser engravingAluminium, stainless steel, titanium, some plastics Permanent — material is removed, not printed Single tone, contrast depends on finishMaterial and engraving area
Dye-sublimationPolyester fabric and coated blanks Very good — ink bonds into the fibre, no layer to peel Full colour, photographic, edge-to-edgeFabric base and print area
Screen printFabric, board, some rubber Good — sits on the surface, can crack at high stretch Solid spot coloursNumber of colours and screens
Woven / printed labelAny sewn item, hangtags, packaging Woven outlasts printed on washable goods Woven is limited; printed is full colourLabel size and quantity

Embroidery — the durability default

Thread is stitched through the substrate, so there is no surface layer to rub off. It is the right choice where the product takes load or gets washed often: collars, harnesses, leashes and bandana edges. The trade-offs are that very small text becomes illegible, large fills get heavy and stiff, and the cost scales with stitch count. Names and small logos are ideal; a large photographic image is not.

Laser engraving — permanent marks on metal

A fibre laser removes material rather than adding ink, so pet ID tags stay readable for the life of the tag. What you should judge on a sample is not permanence but contrast: a shallow engraving on a dark anodised surface can be hard to read in low light. We set depth and contrast per material, and we recommend checking the sample under the lighting your customer will actually use.

Dye-sublimation — full colour on polyester

Sublimation turns ink into gas that bonds with the fibre, so the print has no hand-feel and will not crack or peel. It is the only process here that handles photographic, edge-to-edge artwork, which makes it the natural fit for seasonal bandana drops and printed apparel. The limitation is substrate: it needs polyester or a coated blank. Cotton bandanas and metal tags cannot be sublimated.

Screen print — cheap at volume, limited in colour

Screen print is cost-effective for solid spot colours and simple logos on flat surfaces. Each colour is a separate screen, so complexity costs money, and the ink sits on the surface — fine on a hangtag or a bandana, less ideal on a high-stretch item.

Woven and printed labels — the cheapest brand carrier

A label brands a stock blank without changing the material, which is why it keeps you at the lowest MOQ tier. Woven jacquard is thread-by-thread and survives washing; printed satin labels allow finer detail and full colour but fade sooner on washable goods. If a buyer will wash it, weave it.

How to choose — a short decision path

  1. What is it made of? Metal → laser. Polyester fabric → sublimation. Webbing, cotton or plush → embroidery or a label.
  2. Does it take load or get washed? Yes → embroidery or woven label. No → print is fine.
  3. Is the artwork photographic or multi-colour? Yes → sublimation on a polyester base.
  4. Is it mostly a name? Yes → embroidery on fabric, laser on metal.
  5. Are you testing a market? Yes → a woven label on a stock blank, then upgrade once it sells.
Sample before you scale. We send a digital proof first and a physical pre-production sample before bulk, because contrast, hand-feel and stitch density are things you can only judge in your hand — not on a screen.

Process questions buyers ask

In short

The decoration process decides how your artwork survives the product. Embroidery is thread on top of the fabric, laser engraving burns into metal or leather, and dye-sublimation transfers pigment into the fibre so it cannot crack or peel.

  • Embroidery: Best for names and small logos on webbing, plush and towels
  • Laser engraving: Best for metal ID tags — permanent, no ink to rub off
  • Dye-sublimation: Best for full-bleed photographic patterns on polyester

More buyer guides

Not sure which process fits your product?

Tell us the item and the artwork, and we will recommend the most durable, cost-effective method with a proof.

Request a quote