Custom pet product MOQ: how minimums work and how to lower them
Minimum order quantity is the number that decides whether your first private-label run is a test or a gamble. This guide explains what a supplier's MOQ is actually paying for, why it jumps what sets the 100-piece starting minimum, and how to get it down without damaging your margin.
Why is the MOQ higher for a custom item than for a private-label one?
A private-label run uses a blank that already exists — we add your label or engraving to it. A custom run changes material, colour, size or tooling, which means setup time and material minimums at the mill or mould. That setup is what the higher minimum pays for.
Can I mix sizes and colours to reach the MOQ?
Usually yes for private label: 100 pieces can be split across sizes and colours as long as the blank and the process stay the same. Mixing processes in one order generally moves you to the custom tier because each process is a separate setup.
Do I get a lower unit price at 500 than at 100?
Almost always. The setup cost is fixed, so it is spread over more units, and material is bought in a larger lot. We quote both tiers side by side so you can see the break-even before you commit.
Is the MOQ per design or per order?
Per design per process. Two designs of the same bandana blank count as two runs unless we print them in one sublimation layout, which is why full-bleed printing is the cheapest way to test several artworks at once.
What an MOQ is really paying for
A factory does not charge you for a minimum out of stubbornness. Every production run carries fixed setup costs that are identical whether you make 100 pieces or 5,000:
- Machine setup and digitising. An embroidery design is digitised and test-stitched; a laser job is jigged and focus-tested; a print run is colour-profiled. That work happens once per design, not once per piece.
- Material minimums. Mills sell webbing, fabric and board in lot sizes. Below a certain length, a custom Pantone dye lot costs more than the product it goes into.
- Tooling. A new rubber shape or a metal die is a real, one-off cost — which is why new-shape work sits at the top MOQ tier and why the tooling is owned by you, not by the factory.
- Line time. A short run still occupies the line and the operator. The minimum is partly a way of making that time worth booking.
Once you see it this way, the negotiation becomes practical: reduce setup, use stock material, or spread the setup over more units.
The three tiers we quote
| Tier | MOQ | What it means | Typical use |
|---|---|---|---|
| Private label | 100 | An existing blank, branded with your label, engraving or print. | Testing a market, launching a small collection, Etsy and POD sellers. |
| Custom | 100 | Your colourway, print artwork, size range or hardware on an existing base. | Brands that want their own look without paying for tooling. |
| OEM | 500 | A new shape, mould or pattern developed for you. Tooling is yours. | Established brands protecting a design from copycats. |
The tiers are per design per process. Two artworks on the same blank are two runs unless we can print them together in one layout.
What pushes a minimum up
- A Pantone colour that no one stocks — the mill will want a dye lot.
- A size range. XS–XL across four sizes multiplies the cutting and setup.
- Non-standard hardware or a plated finish sourced specially.
- Mixing processes in one order: each one is its own setup.
- Retail packaging printed to order, which has its own lot minimum.
Six ways to lower your first order
- Start from a stock blank. The single biggest lever. Choose a base that already exists and brand it, and you stay in the lowest tier.
- Use one process. A woven label plus an embroidered name is two setups. Pick the one that carries the brand and add the other later.
- Launch one size first. Prove the design in a single size, then add the range on the reorder when you know what sells.
- Print several artworks in one layout. With sublimation, a full-bleed sheet can carry multiple designs — effectively a multi-design test at one setup cost.
- Accept standard packaging for run one. Plain poly bag with your label now, printed carton once volume justifies the print lot.
- Consolidate lines into one FOB shipment. Bandanas, tags, collars and packaging ship together: one proof cycle, one inspection, one freight booking.
When the higher MOQ is actually the cheaper choice
Setup cost is fixed, so it is divided across more units at 500 than at 100. Add the larger material lot and the unit price usually drops noticeably. We quote both tiers side by side so you can see the break-even before committing — and if your storage or cash flow cannot absorb 500 units, that is a valid reason to stay small. The right answer depends on whether you are testing demand or filling it.
MOQ questions buyers ask
In short
Minimum order quantity (MOQ) is the smallest number of units a supplier will produce in one run for one design. On PET2P it is 100 pieces for private label, 100 for custom-printed or embroidered work, and 500 for OEM runs that need new tooling.
- Private label MOQ: 100 pieces per design
- Custom (printed / embroidered) MOQ: 100 pieces per design
- OEM MOQ with new tooling: 500 pieces — the tooling stays yours
More buyer guides
Want both MOQ tiers quoted side by side?
Tell us the product, process and target quantity — we reply with a digital proof and both price points in 5 working days.
Request a quote